Is your car ready for winter? With these recommended steps from Ken Pollock Mitsubishi you can be sure that your vehicle is set to face the cold season.
Replace Your Wiper Blades
When the snow is really coming down, you’d better hope that your windshield wipers are up to the task. Ensure clear visibility all winter long by changing your wiper blades before the season begins.
Get an Oil Change
You should be getting oil changes regularly in accordance with the recommended mileage in your owner’s manual. Don’t hesitate to get one done before winter arrives to be sure your engine is running its best. It’s also a great opportunity for you to have your car looked at by a professional to be sure everything is in good condition and set for the season.
Check Your Tires
The roads in Pennsylvania will no doubt be slippery with ice and snow during the winter. For the best traction and most control over your car, you need to be sure that your tires are in good condition. Take a look at the tread to make sure it’s not too worn down and check your tires’ air pressure. Keeping your tires in good shape throughout the winter is one of the easiest and most effective steps you can take towards safe winter driving.
As the days get shorter and cooler, it will start to feel more and more like autumn. Before the colorful leaves start arriving, you need to properly prepare your car for fall. Here are a few suggestions to ensure your vehicle is ready.
- Check your tires. Wet leaves on the road can lead to slick conditions. Make sure the tires have enough tread to properly grip the road.
- Turn on the heat. Before the temperatures drop too low, turn on your heater to make sure everything works.
- Get new wipers. Your windshield wiper blades should be replaced every 6-12 months. If your wipers are leaving streaks or the rubber is cracked, it is time for a new set.
- Inspect your lights. Check all of the vehicle’s exterior lights. Replace any broken bulbs and make sure they are all angled correctly.
- Inspect your battery. A weak battery will fail when it starts to get really cold. Look for any corrosion; clean off the terminals. If your battery doesn’t have enough power, get a new one.
If you need help getting your car ready for fall, schedule a service appointment here at Ken Pollock Mitsubishi; we will make sure you are good to go.
Sometimes, it can be nice to know some basic repair skills, like tire swaps and changing your oil, for sticky situations. The team at Ken Pollock Mitsubishi is here to help! If you’re ever in a bind, here are a few steps to help you get started on an oil change at home.
First, you have to find the correct oil and filter for your car. Check your owner’s manual or ask them to look it up for you at the parts store if you aren’t sure. You’ll also need a socket wrench, an oil filter wrench, a funnel, something to catch the old oil as it pours out, and rags.
You want to change the oil when the car is warm, but not blazing hot. Let the engine idle for a few minutes to warm up the oil and help it flow better. Then, locate your drain plug. If you don’t have enough room, you’ll have to jack your car up a couple of feet off the ground.
Put the oil pan under the drain plug, and then use the socket wrench to turn the plug to the left to loosen it. Let the old oil pour out into the pan until it slows to a drip. Replace the plug and then locate the oil filter. Use the filter wrench to loosen it and then use your hand to remove the filter. Put some motor oil on the new filter to keep it from sticking and slide it into place.
Now that your new filter is in place and your drain plug is back on, you can start adding new oil. Pop the hood open and find your oil well, and simply pour as much oil in as your owner’s manual calls for. Check periodically with your dipstick to see if the oil level is high enough.
If this seems like a bit much or you’d prefer to have it done by our well-trained mechanics, stop by Ken Pollock Mitsubishi today! We’d be happy to help you out with any of your repair or maintenance needs.