Sometimes, it can be nice to know some basic repair skills, like tire swaps and changing your oil, for sticky situations. The team at Ken Pollock Mitsubishi is here to help! If you’re ever in a bind, here are a few steps to help you get started on an oil change at home.
First, you have to find the correct oil and filter for your car. Check your owner’s manual or ask them to look it up for you at the parts store if you aren’t sure. You’ll also need a socket wrench, an oil filter wrench, a funnel, something to catch the old oil as it pours out, and rags.
You want to change the oil when the car is warm, but not blazing hot. Let the engine idle for a few minutes to warm up the oil and help it flow better. Then, locate your drain plug. If you don’t have enough room, you’ll have to jack your car up a couple of feet off the ground.
Put the oil pan under the drain plug, and then use the socket wrench to turn the plug to the left to loosen it. Let the old oil pour out into the pan until it slows to a drip. Replace the plug and then locate the oil filter. Use the filter wrench to loosen it and then use your hand to remove the filter. Put some motor oil on the new filter to keep it from sticking and slide it into place.
Now that your new filter is in place and your drain plug is back on, you can start adding new oil. Pop the hood open and find your oil well, and simply pour as much oil in as your owner’s manual calls for. Check periodically with your dipstick to see if the oil level is high enough.
If this seems like a bit much or you’d prefer to have it done by our well-trained mechanics, stop by Ken Pollock Mitsubishi today! We’d be happy to help you out with any of your repair or maintenance needs.